What size mat for an 11 by 14 print in a 16 by 20 frame?
Use a mat with a 16 × 20 inch outside to match the frame insert. With ⅛ inch overlap on each edge of an 11 × 14 print, the window is 10¾ × 13¾ inches. The borders are 2⅝ inches at the sides and 3⅛ inches at top and bottom.
| Measurement | Inches | Millimetres |
|---|---|---|
| 11 × 14 print | 11 × 14 | 279.4 × 355.6 |
| Mat outside and frame insert | 16 × 20 | 406.4 × 508 |
| Actual cut window | 10¾ × 13¾ | 273.05 × 349.25 |
| Left and right border | 2⅝ each | 66.7 each |
| Top and bottom border | 3⅛ each | 79.4 each |
Calculate a mat for an 11 × 14 print in a 16 × 20 frame →
Why top and bottom are wider
The frame is 5 inches wider than the print but 6 inches taller, so the extra inch of height splits into an extra half inch above and below. Equal borders need the frame to be larger than the print by the same amount in both directions, which 16 × 20 is not for an 11 × 14 sheet.
Check whether 11 × 14 is the paper or the image
An “11 × 14 print” can mean the paper size or the printed image area with a white border around it. Enter the whole sheet in the calculator: it checks that the paper fits the frame and sizes a window that overlaps the paper’s edges. If the image has a white border and you want the window to show only the image, the calculator does not plan that window; measure the image area and agree the opening with your framer, while still checking that the full sheet fits the frame.
At this size, check that the frame has enough depth for the glass, mat, print and backing together. Frame depth is not covered by this calculator.
Open this example in the calculator →
Related measuring guides
- What size mat for an 8 by 10 print in an 11 by 14 frame
- What size mat for a 5 by 7 print in an 8 by 10 frame
- Art size versus mat opening when ordering a frame
Overlap reference: Frame It Easy’s explanation, checked 26 October 2026; that seller’s own default is ¼ inch per edge, while the examples here use 3 mm or ⅛ inch as planning values. These worked examples are independent calculations, not confirmation of a particular product’s fit.