FramePlanTHE FRAMING WORKBENCH

Is 40 × 50 cm the same as A3?

No. A3 is 29.7 × 42 cm (297 × 420 mm). A 40 × 50 cm print is 10.3 cm wider and 8 cm taller. An A3 sheet fits inside a 40 × 50 cm insert with room to spare; a mat can fill the space around it. How the sheet is held in place is a separate decision.

A3 and 40 × 50 cm compared, in portrait orientation
SizeCentimetresMillimetres
A3 paper29.7 × 42297 × 420
40 × 50 cm print40 × 50400 × 500

Paper dimensions: PaperSizes.org A-series table, checked 28 October 2026. In inches, A3 is about 11.7 × 16.5 and 40 × 50 cm is about 15.7 × 19.7. The differences above are calculated from the millimetre dimensions.

Calculate a mat for A3 in a 40 × 50 cm frame →

The borders will not be even

A3 and 40 × 50 cm have different proportions. Centred without overlap, the gap around the sheet is 51.5 mm at each side but only 40 mm above and below. If you expected an even border all round, the mat will look wider at the sides.

Borders come out equal only when the frame is larger than the window by the same amount in both directions. Here the frame is 103 mm wider than an A3 sheet but only 80 mm taller, so the sides get more space. With the same overlap on every edge, changing the overlap does not remove that difference. The calculator shows the borders for a centred window with one overlap on all four edges; a window sized independently in each direction has to be planned with your framer.

A custom mat example

This example uses a planning overlap of 3 mm on each edge, not a universal cutting standard. Subtract twice the overlap from each paper dimension: 297 − 6 = 291 mm and 420 − 6 = 414 mm. Centred in a 400 × 500 mm board, the window leaves 54.5 mm at each side and 43 mm at top and bottom. The overlap hides the outer 3 mm of the print on every edge.

Example in millimetres
MeasurementSize
A3 sheet297 × 420
Mat outside and frame insert400 × 500
Actual cut window291 × 414
Left and right border54.5 each
Top and bottom border43 each

Check what “40 × 50” refers to

A frame sold as 40 × 50 cm normally describes the picture or insert area, not the outside of the moulding. If the frame includes a mat, its window may have been cut for a different paper size. Measure the included window before relying on it, and do not trim the print to match a label.

Open this example in the calculator →

Related measuring guides

Overlap reference: Frame It Easy’s explanation, checked 26 October 2026; that seller’s own default is ¼ inch per edge, while the examples here use 3 mm or ⅛ inch as planning values. These worked examples are independent calculations, not confirmation of a particular product’s fit.